GE - General Electric GXRQ18NBN User Manual

Loading ...

Installation Instructions

INSTALATION INSTRUCTIONS

POWER UP THE FAUCET TIMER

1. On the faucet handle, locate the battery cover.

There should be a thin plastic strip that sticks

out from the battery cover.

2. Grasp the plastic strip, pull it all the way out and

discard it.

3. The LED on the faucet handle will briefly flash

red, then blue, to indicate the 6 month timer is

powered up.

FAUCET ELECTRONICS

Inside the faucet handle is a battery operated 6 month timer. On a new Reverse Osmosis system, the product water

faucet is shipped with a battery in the holder. After the faucet has been installed, the thin plastic strip must be

removed, as described below, to power up the 6 month timer.

The faucet LED will light blue for a few seconds whenever the faucet handle is operated. When 90% of the filter

lifetime has elapsed, the LED will flash blue 3 times whenever the faucet handle is operated. It will flash red

continuously when 100% (6 months) has elapsed, to indicate that the prefilter and postfilter cartridges must be

changed.

Always change the battery, as shown on page 21, when replacing the prefilter / postfilter cartridges (every 6 months).

Faucet

Handle

Plastic Strip -

pull out and

discard

Battery

Cover

Loading ...

GE - General Electric GXRQ18NBN GE Reverse Osmosis Filtration System