Loading ...
Loading ...
Loading ...
Washer Operating instructions
Washing Procedures, continued
6
Add laundry load to washer.
• Add items one at a time, each tightly bunched into its
own "ball" to allow beneficial item interaction. Avoid
loading items in a fiat/laid-out fashion.
• For best washing performance, dry load level should
not be higher than the upper row of holes in the wash
tub. Do not overload the washer.
7
• Combine large and small items in a load. Load small
items first. Large items should not be more than half
the total wash load.
• When washing a single heavy item, add I or 2 towels
to balance the load.
if desired, add liquid fabric softener to fabric
softener dispenser (available on some models).
For models wlfh built=in dispenser:
• Add liquid softener to the dispenser, following fabric
softener label directions. DO NOT use granular de-
tergent in this dispenser.
• DO NOT fill above the maximum fill line.
• Turn fabric softener option on.
• Do not use bleach in this dispenser.
For models without a built=in fabric softener dispenser:
• Follow fabric softener label directions.
• Add diluted fabric softener to the final rinse. You
may use a fabric softener dispensing bail.
Other Wash Products
° Water conditioner, detergent booster and enzyme
products may be added with the detergent.
8 Select the appropriate cycle and settings for
the [oad.
NOTE ....................... ,,
Topreventstaining,donotoverfi,the"FABRIC
SOFTENER" chamber or pour liquid fabric softener
directly on the wash load.
* See Washer Operating Instructions on following
pages.
Use of multi-product (detergent plus softener) sheets or
color-absorbing sheets NOT recommended. They could
disable your machine and result in unwarranted repair
costs.
9 Start the washer.
• Close the washer lid. The washer will not operate
with the lid open.
• Push in or turn the cycle selector knob or turn any
option knob to "wake" the washer. You will hear
three short beeps to indicate washer is ready to
operate.
• After making your selections, push in the selector
knob to start the cycle. You will one hear short beep
and the washer lid will loci<.
" The washer will perform a dry load sensing proce-
dure before adding water to the tub.
• To pause a running cycle, push in the cycle selector
knob.
• To add a forgotten item to the wash tub, push in the
cycle selector knob to pause the cycle as above. You
will hear two beeps. After the loci< releases, lift the
lid and add the item. Close the lid and push in the
selector knob again_ continuing the current cycle.
If a running cycle is paused, washing performance may
differ.
• To cancel a running cycle, push in and hold the cycle
selector until the washer discontinues running. You
may have to perform a drain cycle to remove water
left in the tub.
10
Loading ...
Loading ...
Loading ...