Loading ...
Loading ...
Loading ...
UNPACKING AND PREASSEMBLY
WARNING: To avoid injury from unexpected start-
ing or electrical shock, do not plug the power cord
into a source of power during unpacking and
assembly. This cord must remain unplugged
whenever you are working on the saw.
2. Place the saw on a secure stationary work surface
and look the saw over carefully.
Model 113.234600 is shipped complete in one box.
WARNING: Although small, this saw is heavy. To
avoid back injury, get help whenever you have to
ft the saw more than 10 inches.
1. Remove the miter saw from the carton by lifting the
saw by the base.
WARNING: If any part is missing or damaged, do
not plug the saw in until the missing or damaged
part is correctly replaced. To avoid electric shock,
use only identical replacement parts when servic-
ing doub e nsu ated tools.
tools needed
Tools required for assembly and alignment of Miter Saw:
• Medium Screwdriver
• #2 Phillips Screwdriver
• Combination Square
• ':_ Box End/Open End Wrench or Socket
• 2 - 1_6 Box End/Open End Wrenches or Adjustable
Wrenches or Socket Wrenches
• -%6" Hex "L:' Wrench
MEDIUM SCREWDRIVER
#2 PHILLIPS SCREWDRIVER
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT STRAIGHT EDGE OF
LINE ON BOARD BOARD 3t4" THICK
EDGE_ _',_ .A THIS EDGE MUST BE
ALONG THIS \ .-; 7t')3_,P, ./ PERFECTLY STRAIGHT
SHOULD BE NO GAP OR OVERLAP WHEN
SQUARE IS FLIPPED OVER IN DOTTED POSITION
1/2"WRENCH
Wld' BOX END/OPEN END
WRENCHES
ADJUSTABLE WRENCH
I_"SOCKET
COMBINATION SQUARE
1%d'SOCKETS &
SOCKET WRENCHES
%d' HEX "L' WRENCH
€_ c_
oz. _,,)
Loading ...
Loading ...
Loading ...