Loading ...
Loading ...
Loading ...
5
3. Center the window platform on the newly drawn line with the inner (second) tab on the
bottom of the platform pressed against the inside edge of the window track. Mark two
holes on the window track or sill using the two holes on the window platform on either side
of the platform tab. Remove the window platform and then drill two 9/64” holes in either the
window track or sill in the two marked spots.
4. Apply the adhesive window sliding track sealing strip by first removing the protective
backing and then placing it to the room side of the window track. The center of the sealing
strip should coincide with the line draw in step 2. The two screw holes drilled in step 3
should be directly above the sealing strip on the inner track.
5. Securely attach a siding-protection board to the side of the house.
6. Place the window platform with the platform tab against the inside of the window track.
Fasten the window platform (allowing for some adjustment space) to the window track or
sill using the previously drilled holes and the appropriate length screws (items 9 through
11 in Parts Supplied).
7. Confirm that, when secured, the outside edge of the window platform is 5/16” (~4°) lower
than the inside. If this is not the case, adjust the window platform until it is in the correct
position and then secure it in place by tightening the screws.
A. Window track
B. Window platform
(tab).
C. Alternate drilling
location (depending
on window sill depth)
Note: This step is optional. If you have no intention of using a siding-protection board please
proceed with step 6.
A. Siding-protection
board
B. Inside Wall
C. Window platform
Loading ...
Loading ...
Loading ...