Loading ...
Loading ...
Loading ...
6
8. Use a level to make sure that the platform is flat. Adjust the screws and use leveling shims
if necessary.
Attach Window Panel Frame and Side Panels
1. Measure the height of the window opening from the top of the window platform. Subtract
20 5/8” from this measurement and take note of the length for step 2.
2. Cut the plastic window panel along the longer side to the length measured in step 1 using a
fine tooth saw. Remove any burrs with a file.
3. Fasten the side channels to the sides of the air conditioner using three #8x3/8 screws (item
17 in the parts supplies list) per channel. When fastening the screws start with the top
screw and make sure that the curved ends on the long end of the channel face back
towards the air conditioner.
4. Slide the plastic window panel into the window panel frame with the smooth side facing the
flat edges of the panel frame. Once the plastic window panel is in place, slide the panel
frame assembly down into the side channels until the bottom of the plastic panel rests
inside the groove on top of the air conditioner.
A. Side Channel
B. #8x3/8 screw
Caution: Take proper precautions when using the fine tooth saw. To avoid injury make sure that
the plastic window panel is secure before cutting.
Loading ...
Loading ...
Loading ...