Loading ...
Loading ...
Loading ...
SERVICE RECOMMENDATIONS
SERVICE RECOMMENDATIONS
FIRST BEFORE EVERY EVERY EVERY BEGINNING
2 EACH 5 10 25 EACH BEFORE
PROCEDURE HOUR USE OFTEN HOURS HOURS HOURS SEASON STORAGE
S Tighten all screws and nuts _/
N Check Traction Clutch
Cable Ad ustment _/
O (See Cabe Ad ustment)
W
Check Auger clutch Cable
B Ad ustment _/
L (See Cabe Ad ustment)
O Adjust Drive Belts _/ _/
W
E LubricateChains and _ _/
Hex Shaft
R
Lubricate Auger Shaft (See
Shear Bolt Replacement) _/ _/
E
N Oil, Check _/ _/ 4
G
I
N Oil, Change _/ _/
E
The warranty on this snow blower does not cover items that
have been subjected to operator abuse or negligence. To re-
ceive full value from the warranty, operator must maintain
snow blower as instructed in this manual. The following Ser-
vice Recommendations is supplied to assist operator to
properly maintain snow blower. This is a check list only. Ad-
justment referred to will be found in Adjustments/Repairs
section of this manual.
AFTER EACH USE
1. Check for any loose or damaged parts.
2. Tighten any loose fasteners.
3. Check and maintain the auger.
4. After each use, remove all snow and slush off the snow
blower to prevent freezing of auger or controls.
5. Check controls to make sure they are functioning proper-
ly.
6. If any parts are worn or damaged, replace immediately.
F-031020L 19
Loading ...
Loading ...
Loading ...