Greenworks 20292 40V 12-Inch Cordless Chainsaw, Tool Only

User Manual - Page 9

For 20292.

PDF File Manual, 52 pages, Read Online | Download pdf file

20292 photo
Loading ...
Loading ...
Loading ...
WARNING
If the battery pack or charger is damaged, replace
the battery pack or the charger.
Stop the machine and wait until the motor stops
before you install or remove the battery pack.
Read and understand the instructions in the
battery and charger manual.
1. Align the lift ribs on the battery pack (15) with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4 REMOVE THE BATTERY PACK
1. Push and hold the battery release button (18).
2. Remove the battery pack from the machine.
9 OPERATION
NOTE
Remove the battery pack and keep hands clear of the
lock out button when you move the machine.
IMPORTANT
Examine the chain tension before each use.
9.1 EXAMINE THE CHAIN OIL
NOTE
Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add oil if necessary.
9.2 HOLD THE MACHINE
1. Hold the chainsaw with your right hand on the rear
handle and left hand on the front handle.
2. Hold the handles with the thumbs and the fingers
around them.
3. Make sure that your left hand holds the front handle
and your thumb is below the handle.
9.3 START THE MACHINE
4
6
1. Press the lock-out button (4).
2. Press the trigger (6) while you hold the lock-out
button.
3. Release the lock-out button.
9.4 STOP THE MACHINE
1. Release the trigger to stop the machine.
9.5 FELL A TREE
It is recommended that the first-time user should, as a
minimum practice, start cutting logs on a sawhorse or
cradle.
Before you start to fell a tree, make sure that:
The minimum distance between the areas of
bucking and felling performed by two or more
persons at the same time is two times the height
of the tree felled.
The operation does not:
Cause injury to personnel.
Hit utility lines. If the tree touches utility lines,
immediately tell the utility company.
Cause losses in property.
The user is not in the danger area (24), for example,
the downhill side of the area.
The escape paths (25) that extend back and
diagonally behind the felling direction (23) are clear.
The felling direction is controlled by:
The natural lean of the tree.
9
English
EN
Loading ...
Loading ...
Loading ...