Loading ...
Loading ...
Loading ...
(71,1)
北米Model "A1490BE-A" EDITED: 2022/ 2/ 15
! To install a child restraint system
using lower and tether an-
chorages
S01AG070103
To install a child restraint system using
lower and tether anchorages, perform the
following procedure.
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Move the seatback back and forth to
confirm that it is securely locked into place.
– Check that the red colored unlock-
ing marker which is attached to the
bottom of the lock release knob is
invisible. For details, refer to “Folding
down the rear seatback” �1-7.
2. You will find marks “ ” at the bottoms
of the rear seatback. These marks indicate
the positions of the lower anchorages
(bars).
Peel off the anchorage cover completely
from the selected side of the rear seat
cushion to expose the anchorages (bars)
to be used for installation of the child
restraint system.
If it is hard to install the child restraint
system because the anchorage cover
returns to the original position, press the
anchorage cover to the seat cushion until it
is flat.
3. Remove the rear seat head restraint.
For details, refer to “Rear seats” �1-9.
4. Store the head restraint that has been
removed in the cargo area.
CAUTION
Do not place the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
– CONTINUED –
Seat, seatbelt and SRS airbags/Child restraint systems
1-39
1
Loading ...
Loading ...
Loading ...