Loading ...
Loading ...
Loading ...
(47,1)
北米Model "A1490BE-A" EDITED: 2022/ 2/ 15
2. Sit well back in the seat.
3. Pick up the tongue plate and pull the
belt out slowly. Do not let it get twisted.
. If the belt stops before reaching the
buckle, return the belt slightly and pull it
out more slowly.
. If the belt still cannot be unlocked, let
the belt retract slightly after giving it a
strong pull, then pull it out slowly again.
4. Insert the tongue plate into the buckle
until you hear a click.
5. To tighten the lap part, pull up on the
shoulder belt.
6. Place the lap belt as low as possible on
the hips, not on the waist.
! Adjusting the front seat shoulder
belt anchor height
S01AE060101
The shoulder belt anchor height should be
adjusted to the position best suited for the
driver/front passenger. Always adjust the
anchor height so that the shoulder belt
passes over the middle of the shoulder
without touching the neck.
To raise:
Pull the release knob and slide the anchor
up.
To lower:
Pull the release knob and slide the anchor
down.
Pull down on the anchor to make sure that
it is locked in place.
– CONTINUED –
Seat, seatbelt and SRS airbags/Seatbelts
1-15
1
Loading ...
Loading ...
Loading ...