Loading ...
Loading ...
Loading ...
W415-2007 / D / 04.28.21
EN
6
general information
1.2 specifications
•
Before beginning your installation, consult with your local building code agency or fi re offi cials and insurance
representative to ensure compliance.
• Non-toxic smoke will be emitted during the paint curing process to help dissipate the smoke open a window
near the appliance.
• Remove any dust or debris off the top of the appliance before fi ring the appliance as the paint will become
soft as the appliance heats up and will harden as the appliance cures. To cure the paint on your appliance,
burn your appliance moderately hot during the fi rst few fi res.
• To keep the gasket from sticking to the appliance as the paint is curing, periodically open the door every
5-10 minutes.
• For the fi rst two weeks, use generous amounts of fuel and burn the appliance with the damper wide open
for an hour as the appliance goes through a process of eliminating moisture in the steel and fi rebricks.
The initial heat output will be reduced while the moisture is bring drawn from the appliance and it will be
necessary to build several hot fi res to remove this moisture.
• DURING THIS PROCESS DO NOT OVERFIRE THE APPLIANCE. REDUCE THE AMOUNT OF AIR
COMING INTO THE APPLIANCE IF THE APPLIANCE OR CHIMNEY BECOMES RED.
* As tested using test method ALT-125
** Figures will vary considerably with individual conditions.
*** Wolf Steel Ltd. estimated realistic BTU/hr with cordwood logs and regular refueling.
**** Required in order to achieve proper draft.
Emissions
1.21 g/hr
Efficiency
Overall LHV HHV
71.60% 77.07% 71.63%
Viewing area (Contemporary model)
273.7 sq. in (1765.8 sq. cm)
Viewing area (Traditional model)
278 sq. in. (1793.5 sq. cm)
Chamber (D.W.H)
13 3/4” x 20 7/8” x 11 1/2”
(349.3mm) x (530.3mm) x (292.1mm)
Capacity
1.8 ft
3
(0.05 m
3
)
Approx. area heated**
1500 ft
2
(139.4 m
2
)
Maximum heat output***
55,000 BTU/Hr
Heat output*
14,492 - 47,887 BTU/Hr
Duration low fire**
8 Hours
Weight complete
400 lbs (181.4 kg)
Weight of bricks
80 lbs (36.3 kg)
Weight without cast surround
(complete with door) and bricks
250 lbs (113.4 kg)
Minimum stack height ****
15 feet (5.4m)
Efficiency standard
B415.1-10
1.3 general instructions
Loading ...
Loading ...
Loading ...