Loading ...
Loading ...
Loading ...
SAFETY INSTRUCT|ONS FOR CONNECTING ELECTRICITY
WARN ING: Torodocotherlskoffire,° o ricshock,ori.jurytoporso.,whenusl.g,hi,opp,ance,
follow basic precautions, indudlng the following:
* Do not, under any circumstances, cut or remove
the ground prong from the power cord. To prevent
personal injury or damage to the dryer, the electrical
power cord must be plugged into a properly
grounded outlet.
"For persenar safety, this dryer must be properly
grounded. Failure to do so can result in electrical
shock or injury.
• Refer to the installation instructions in this manual
for specific electricaJ requirements far your model.
Failure to follow these instructionscan create an
electrical shock hazard and/or a fire hazard.
• This dryer must be plugged into a properly grounded
outlet. Electrical shock can resuJt if the dryer is not
properly grounded. Have the wall outlet and circuit
checked by a qualified electrician fo make sure the
ouffe_ is properly grounded. Failure to follow these
instructions can create an electrical shock hazard
and/or a fire hazard.
* The dryer should always be plugged into its own
individual electrical outlet which has a voffage rating
that matcFJes the rating plate. This provides the best
performance and also prevents overloading house
wiring circuits which could cause a fire hazard from
overheated wires.
* Never unplug your dryer by pulllng on the power
cord. Always grip the plug firmly and pull straight
out from the outlet. The power cord can be damaged,
resulting in a risk of fire and electrical shock.
wRepair or replace immediately al| power cords that
have become frayed or otherwise damaged. Do not
use o cord that shows cracks or abrasion damage
along its length or at either end. The power cord con
melt, creating electrica! shock and/or fire hazard.
oWhen installing or moving the dryer, be careful not
to pinch, crush, or damage the power cord. This will
prevent injury and prevent damage to the dryer from
fire and electrical shock.
SAVE THESE INSTRUCTIONS
6
Loading ...
Loading ...
Loading ...