Craftsman 24724020 User Manual

Loading ...

Attaching Chute Stop Bracket

1. Removethecarriageboltand lock nutholdingthe chute stopto

the deck.Seethe left Insetof Fig.20. Savethe hardware.

2. Installthe newchutestopbracket,fromthe looseparts,at the

samepositionon thedeck. Seethe rightInsetof Fig.20. Secure

withthe hardwareremovedearlier.

NOTE:An extracarriageboltandlock nuthavebeen suppliedin

yourbaggerkit in hardwarepack689-00163.Youmay replacethe old

hardwarefor the chutestopbracketwith this newhardware,orsavefor

lateruse.

NOTE:This chute stop bracketmaystayonthe unitevenwhenthe

baggeris not beingused.

Figure20

Installingthe Chute Strap on the Discharge Chute

1. Secure the strap to the chute with the hex screw (710-3015)

and flange nut (712-04064) provided In Hardware pack 689-

00163. See Fig. 21.

f *-

Deck

................................................................................_ ............

, I /

< ,_ 54-inch GT Deck

Figure 21

Note: For all lawn tractors equipped with a 50-inch deck,

secure the strap in the upper hole as shown in Fig. 21.

Note: For all tractors equipped with a 54-inch deck, secure the

strap in the lower hole, as show in Fig. 21.

Installing the Discharge Chute

1. Reinstallthe cuttingdeckto the tractorreversingthe instructions

for DeckRemovalin operator'smanualof thetractor.

2. Raisethe deckto itshighestposition.

3. Raisethe chutedeflector(A in Fig.22) on the deckand holdit

whileyou positionthedischargechuteoverthe chuteopening.

4. Insertthe hingepinof the dischargechuteintothe tubeon the

chutestopbracket.See Bin Fig.22.

5. Rotatethechute aroundthe decksothat itsfront edgefits snugly

intothe deckopening.Lowerthe chutedeflectorslowly(C in Fig.

22).

Figure 22

Attachthe retainerstrap on the dischargechuteto the retainer

clip on the deck. Referto Fig.23.

Figure 23

Loading ...

Craftsman 24724020 3-bin bagger