Loading ...
Loading ...
Loading ...
36
BLUETTI
Box Pro.
Step 2: Plug the communication cables from each of the two EP500Pro’s to the Split
Fusion Box Pro.
Step 3: Set the Machine Type to "Split Phase" on EP500Pro either.
Step 4: Select "Master" or "Slave" on the operating EP500Pro. Select "Master" will
set the operating EP500Pro as the one to control both two EP500Pro. Select "Slave"
will set the operating EP500Pro as the other EP500Pro as the "Master" one.
CONNECTION 1 (Standard Mode)
“Single Phase” is set as the default machine type if you are operating a single
EP500Pro. This is the only and correct setting if a single EP500Pro is being used.
Machine type is just used to set for Split Phase, “Split Phase” is only used for
connecting both *2 EP500Pro (exclusive for 100-120V Version) bonded 2 pairs
of EP500Pro to one power system to double the output power, voltage, so as to
capacity. Please refer to Split Phase setting for detailed information.
CONNECTION 2 (Power Mode)
In Split Phase Power System, it is recommended that you choose our matching
AC input cable. The AC input ports of the two machines are connected to
L1,N,PE and L2,N,PE. Make sure that the phase of the two machines is correct.
This AC Input Cable(Optional Purchase) is designed to match Split Phase
System.
One end of the cable is connected to the NEMA L14-30 socket, and the other
end is connected to the AC input interface of both two units through aviation
plug.It must be ensured that the phase of the two machines is correct.
The current capacity of AC input plug shall be ≥ 30A.
Loading ...
Loading ...
Loading ...