Loading ...
Loading ...
Loading ...
32
BLUETTI
10.2. Enable UPS Running Mode
10.2.1 Standard UPS Mode
●Offline UPS: Basic UPS Working Mode
EP500Pro will power your load directly from the grid and maintain a 100%
charge. When grid power fails, the EP500Pro switches to internal batteries.
10.2.2. Time Control UPS Mode
●This allows you to set the times that EP500Pro will be charged via grid power
and the times to run loads from its battery.
Charge Time: Set the time of EP500Pro when to be charged by grid to avoid
the higher time-of-use electricity (peak) rates, normally set to off-peak times.
Discharge Time: Set the time to use the EP500Pro batteries to power the loads
connected on AC output port of EP500Pro or Sub Panel (Optional Purchase).
Usually set during peak-rate hours.
●Parameter Setting:
Battery SOC Low: When the remaining capacity of EP500Pro is under the
preset Battery SOC Low state, the EP500Pro will stop powering loads connected
to the AC output ports of the EP500Pro or Sub Panel (Optional Purchase).
Battery SOC High: The maximum capacity EP500Pro can be charged via grid.
The remaining percentage will be charged either by solar (PV) or 2nd adapter.
Loading ...
Loading ...
Loading ...