Simpson Cleaning CM60973 USE AND CARE MANUAL

Loading ...

Page 7

WARNING!

The threads on the lance and gun coupler can be easily cross threaded resulting

in an improper assembly. An improper assembly of the gun and lance can result in personal

injury. Do not use if the threads on the gun coupler and or lance are cross

threaded.

1. Secure the lance to the gun by

carefully turning the coupler on the spray

gun until the coupler stops rotating. Do

not over tighten. Most of the threads on

the lance will not be visible if the lance

and gun are properly assembled. Be

careful not to cross-thread the gun and

lance.

Assemble the spray gun

UNPACKING

ASSEMBLY

Follow the steps outlined in this section to unpack and assemble your pressure washer.

Ifyouhaveanyquestionsregardingtheunpackingorassemblyofyourpressurewasher,

please have your model number and serial number ready, then contact customer support at

1-877-362-4271 or email [email protected].

1.Placetheshippingcartononasolid,atsurface.

2. Carefully cut the top of the carton open.

3. Carefully cut each corner of the carton from top to bottom.

4.Layeachsideofthecartonatontheground.

5. Remove the contents of the carton.

Install button-style handle

Press and hold buttons then slide

handle onto frame until buttons

click into place.

Attach the spray gun holder to the frame

using the supplied bolt and knob.

Loading ...

Simpson Cleaning CM60973 Clean Machine