Simpson Cleaning CM60973 USE AND CARE MANUAL

Loading ...

Page 28

Thepumponthis unitisamaintenancefree design.Thepumpwaslledwithoil atthe

factoryandhasnooildrainorllplugs.Ifthereisaproblemwiththepumponthispressure

washer call 1-877-362-4271 or email [email protected].

Before each use, check engine for loose or damaged parts, signs of oil or fuel leaks, and/or

anyotherconditionthatmaya�ectproperoperation.Alwayskeepallsafetyguardsinplace

and in proper working order. Repair or replace all damaged or defective parts immediately.

For safety reasons, the manufacturer recommends all engine service and repairs (including

emission control devices and systems) be performed by an authorized service center.

All warranty replacements or repairs must be performed by an authorized distribution or

servicecenter.Tondanauthorizedservicecenternearyou,obtaininformationabouthow

to make a warranty claim, or to make arrangements for authorized warranty repairs, please

call 1-877-362-4271 or email [email protected].

Forallotherinformationonenginemaintenance,refertotheenginemanual.

Pump Maintenance

Engine Maintenance

STORAGE AND TRANSPORTATION

Storing for Two Months or Less

(or when freezing temps are expected)

1. Fill fuel tank per the OPERATING CHECKLIST section of this manual then add a fuel

stabilizer per the manufacturer’s recommendations. NOTE: Using a fuel stabilizer (sold

separately) when storing gasoline may help prevent problems related to alcohol blended

fuelsinoutdoorpowerequipmentengines.Alwaysfollowtheinstructionsprovidedbythe

fuel stabilizer manufacturer to mix and use correctly.

5.Shuto�thewatersupply.Removethewatersupplyhose.

2. Complete the steps in the OPERATING CHECKLIST, CONNECTING HOSES, and

PURGING AIR FROM THE PUMP sections of this manual.

3. Start the engine per the STARTING section of this manual and run it for ten (10) minutes

toallowthestabilizedfueltocirculatethroughtheentirefuelsystem.Besuretosqueezethe

triggertokeepwaterowingthroughthepumpandsprayguntoavoidoverheating.

Turn the engine switch to the OFF position.

9. Store the pressure washer in a clean, dry area out of direct sunlight.

6.Squeezethesprayguntriggertorelievethepressureinthehoseandpumpthendrain

the high pressure hose. Disconnect the high-pressure hose from the pump and spray gun.

Allow the engine to cool completely.

Protect the pump by using SIMPSON

Pump Guard per the USING PUMP GUARD

section of this manual.

Loading ...

Simpson Cleaning CM60973 Clean Machine