Loading ...
Loading ...
Loading ...
Door Removal instructions
Getting Through Narrow Spaces
If your refrigerator will not fit through an entrance area_ you
can remove the doors. Check first by measuring the entrance.
To prepare for removing the doors:
1. Make sure the electrical power cord is unplugged from
the wall outlet.
2. Open the freezer drawer and remove the toe grille (see
"Installation" section).
3. Remove any food from the door shelves and close the
doors.
To remove the top hinge covers:
1. Remove the two screws from each cover over the top
door hinges.
2. Lift inside edge of hinge cover and tilt back.
Rear
, CoverScrew
NOTE
DO NOT remove the ground screw from hinge.
To remove the refrigerator doors:
1. Trace lightly around the door's top hinges with a pencil.
This makes reinstallation easier.
.
Disconnect the harness by grasping both sides of the
connector firmly, depress the Jatch_ and pull apart.
Remove the two screws from the top hinge. Lift the door
off: of the bottom hinge and set it aside.
. Detach the water tube from the connector located behind
the refrigerator and pull the tube back out to the front of
the unit. The connector releases when you press inward
on the outer sleeve while pushing the tube toward the
connector then while continuing to hold in the sJeeve_pull
the tube away.
NOTE
Use care while pulling the water tube from the unit to be
sure you do not kink it.
11
5 Feet
Loading ...
Loading ...
Loading ...