Loading ...
Loading ...
Loading ...
When you press the " " button again, the manual
watering task ends even if it is watering and the timer
will switch back to Auto mode.
Do not use your timer when the air tempera-
ture is below 40℉(4.5℃), the timers should
be removed from the hose faucet and stored
indoors to avoid potential frozen damage.
Filter can trap dirt particles, please clean
filter regularly and replace if worn.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel cadmium) batteries.
Used up or dead batteries must be removed
from the timer and disposed of properly.
Please replace batteries when the low
battery indicator appears the display. When
replacing the power unit, please make sure
that the water timer is dry.
1. Open the battery cover.
2. Insert four AA (1.5V) alkaline batteries.
· Please do not insert rechargeable batteries to avoid
low voltage.
· The display will turn on for 3 seconds when power on.
Please make sure the timer is in Auto Run state.
1. Press the " " and Zone 1 have been select.
2. Press " " to select watering duration from
1 min to 23 hours. Press" "to confirm the
setting of Zone 1. And Zone 2 have been select.
3. Press " " to select watering duration from
1 min to 23 hours. Press" "to confirm the
setting of Zone 2.
Manual
· The timer don't have programmable
memory, it need to reset once power off.
1. Each program can only have one valve for watering.
2. If Z1 or Z2 is set to 00, the zone will not be watered.
Note:
6
Multi-Function
6. Precautions
4. Battery Installation
Note:
7. FAQ
Four batteries loaded are new 1.5V AA alkaline
batteries, make sure the batteries are properly placed
in the battery box. Do not use rechargeable batteries,
please you must use alkaline batteries.
A1:
Q1: The LCD screen does not display anything
when the batteries are installed.
Clock should be set to the correct time.
Start time is set to desired the time.
Rain Delay is on.
OFF mode is on.
The batteries are low.
The faucet is turned off.
A2:
Q2: Water does not come on at preset time.
Check if:
The O-ring is connected correctly to the hose tap.
The connection outlet or water pipe is broken.
The faucet and water pipe has a different thread.
If necessary, please use an appropriate adapter or
PTFE tape.
A3:
Q3: The hose tap connection/outlet leaks.
Check if:
If your are gravity feed system such as rain barrel system,
then it won't work and will keep low water pressure.
Gravity feed has no real pressure when dealing with a rain
barrel. It needs pressure measuring.
A4 :
Q4: Why is the water valve out of little water?
The timer have one year warranty, if you have any
questions, please feel free to contact via
The following conditions are not included in the warranty:
-Problems occur due to its use for other purposes, or
improper use or use of components not supplied by
Diivoo.
-Damages caused by improper use, for example, wrong of
power supply, artificial damage, etc.
8. After-sales Service
1
Inlet/Outlet Thread
Working Water Pressure
Working Temperature
Rain Delay Time
Waterproof
Included in the box
NH3/4"
7.25psi - 116psi
40.1˚ F-113˚ F
1 day and up to 7 days
IPX5
Watering Duration
00:01-23:59
5. Specification
· All Auto program are on hold during the rain delay.
If you want to cancel the Rain Delay, press " "
button 5s again.
· Rain delay allows you to postpone watering for 1
day and up to 7 days.
Note:
Please make sure the timer is in Auto Run state.
1. Hold and press " " button 5s until the appears
on the screen.
2. Press " " button to set the duration of the
delay from 1 to 7 days.
3. Press " " button it will start to watering.
Rain Delay
2
Please make sure the timer is in Auto Run state.
Hold and press " " button 5s until the " " appears
on the screen. If you want to cancel the " ", press
" " button 5s again.
Children Lock
3
1 x Water Timer,
2 x Threaded connector,
1 x 1/2" inlet adapter,
3 x Extra Rubber Washers,
1 x Thread Seal Tape,
Instruction