Loading ...
Loading ...
Loading ...
7
ASSEMBLY INSTRUCTIONS
Black (hot/power)
White (neutral)
Bare/Green
(ground)
Red
White
White
White
Black
Blue
Blue
Black
Green
Green
Receiver
12
11
11. Align the canopy over the loosened mounting bracket
screws. Place the J-shaped slot of the canopy onto the
mounting bracket screws and rotate clockwise. Secure
the canopy with the two previously removed mounting
bracket screws. Tighten all the mounting bracket screws
securely.
12. Partially insert three blade screws, along with their
blade washers, through the blade and into the blade arm.
Tighten each blade screw with a Phillips screwdriver (not
included), starting with the one in the middle. Repeat this
step for the remaining blades and blade arms.
10. Use wire connectors to connect the receiver and fan
wires to the supply wires from outlet box according to the
wiring diagram and the following instructions:
• Connect the blue wire from receiver to blue (light power)
wire from fan.
• Connect the black wire from receiver to black (fan power)
wire from fan.
• Connect the red wire from receiver to black (hot/power)
supply wire.
• Connect the white wire with red label from receiver to
white (neutral/common) supply wire.
• Connect the white wire with white label from receiver to
white wire from the fan.
• Connect the green wires from the downrod and mounting
bracket to the bare/green (ground) supply wire.
Important: After the connections have been made, the
connected wires should be turned upward and pushed
carefully up into the outlet box. Place the black and white
wire connections on opposite sides of the outlet box.
WARNING: Do NOT
wire the fan motor to a
variable-speed (dimmer)
wall control.
10
9. Insert the receiver into the opening of the mounting
bracket with at side facing up.
9
Blade Screw
Blade Washer
Blade Arm
Blade
Canopy
Wire Connector
Mounting
Bracket Screw
ReceiverMounting
Bracket
J-shaped Slot
Round
Hole
Loading ...
Loading ...
Loading ...