Loading ...
Loading ...
Loading ...
I BEFORE CALLING FOR SERVICE (continued)
! !! ! ! ....
Excessive sudsing Too much detergentor incorrect HE detergents are formulated specifically for
detergent. High-Efficiency washersand contain suds-
Staining
Washer will not turn ON
NOTE. If the washer stopped
during a cycle due to a loss of
power, the washer will resume
the cycle where it stopped when
the power is restored.
Washcycletime islongerthanusual
Musty or mildewy odor in washer
Bleach or softener dispensed
too soon.
Bleach or softener was added
directly to the wash load in the tub.
Washer was not unloaded promptly.
Clothes were not properly sorted.
Power cord is not properly plugged in.
House fuse is blown, circuit breaker
has tripped, or power outage has oc-
curred.
House fuse is blown, circuit breaker
has tripped, due to multiple
appliances on one outlet.
The washer automatically adjusts the
wash time for the amount of laundry,
water pressure and other operating
conditions.
Incorrect or too much detergent has
been used.
Inside of tub was not cleaned properly.
Oversudsing of detergent.
Water leaks
reducing agents. Only use detergent with the
High-Efficiency (HE) logo. For detergent quan-
tities refer to the How to Use section.
Dispenser compartment is overfilled causing
bleach or softener to dispense immediately.
ALWAYS measure bleach to prevent
overfilling - one cup maximum.
Dispenser drawer closed too quickly causing
softener to dispense immediately.
Always use the dispensers to ensure that laun-
dry products are properly dispensed at the
right time in the cycle.
Always remove items from the washer as soon
as possible after the cycle is complete.
Always wash dark colors separately from light
colors and whites to prevent discoloration.
Never wash heavily soiled items washed with
lightly soiled items.
Make sure that the plug is plugged securely
into a grounded, 3-prong, 120-VAC, 60-Hz
outlet.
Reset circuit breaker or replace fuse. Do not
increase fuse capacity. If the problem is a cir-
cuit overload, have it corrected by a quali-
fied electrician.
Reset circuit breaker or replace fuse. If more
than one appliance is connected to the outlet,
call an electrician to have an additional
circuit installed.
Thisis normal. The washer adjusts cycle time auto-
matically to provide optimal resultsfor the select-
ed cycle. Thetime remaining shown in the display
is only an estimate. Actual time may vary.
Use only High-Efficiency (HE) detergent in ac-
cordance with the manufacturer's instructions.
Run the CLEAN WASHER cycle regularly.
Oversudsing may create leaks, and may be
caused by the type and amount of detergent
used. High-Efficiency detergent is the only
detergent recommended. Make sure that
detergent and any additives are put into the
correct dispenser compartments. The normal
amount of detergent to use is 1A to 1/2of
the maximum amount recommended by the
detergent manufacturer. Always reduce the
amount of detergent if the load is small or
lightly soiled, or if your water is very soft.
Never use more than the maximum amount
recommended by the detergent manufacturer.
28
Loading ...
Loading ...
Loading ...