Loading ...
Loading ...
Loading ...
Instructions
for the installer
7. POSITIONING IN THE COUNTER TOP
The following operation requires building and/or carpentry work so must
be carried out by a competent tradesman.
Installation can be carried out on various materials such as masonry, metal,
solid wood or plastic laminated wood as long as they are heat resistant (T 90°C).
7.1 Fixing to the supporting structure
Create an opening in the top surface of the counter, keeping a minimum
distance of 50 mm from the rear edge.
This appliance can be mounted against walls higher than the work
surface in accordance with AS/NZS5601 so as to avoid damage from
overheating.
Make sure that there is a minimum distance of 600 mm between the highest
part of the highest burner and any combustible shelf or overhanging
combustible material that may be installed directly above it in accordance with
AS/NZS5601.
Do not use aggressive products containing alcohol or products for cleaning steel
and glass when cleaning the knobs, as these products could cause permanent
damage.
If installing over an empty kitchen unit with doors, a separation panel must be
placed under the hob. Keep a minimum distance of 10 mm between the bottom
of the appliance and the surface of the panel, which must be easily extractable
to allow sufficient access for any technical assistance.
16
Loading ...
Loading ...
Loading ...