Loading ...
Loading ...
Loading ...
17
START
BAKE
BROIL
HI/LO
BROIL
HI/LO
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour mili-
tary time clock or blackout the clock dis-
play, follow the steps below.
1. Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until the
display shows SF.
2. Touch the TIMER /CLOCK pad once. The
display will show 12 hr. If this is the
choice you want touch the START pad.
Touch the TIMER/CLOCK pad again to
change to the 24 hour military time clock.
The display will show 24 hr. If this is the
choice you want touch the START pad.
Touch the TIMER/CLOCK pad again to
blackout the clock display. The display will
show OFF. If this is the choice you want
touch the START pad.
NOTE: If the clock is in the blackout mode
you will not be able to use the Delay Start
function.
START
BAKE
BROIL
HI/LO
TIMER
CLOCK
HOLD 3 SEC.TO
SET CLOCK
Special features of your oven control.
Safety Instructions
Operating
Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
Installation
Instructions
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps
will sound followed by one beep every 6
seconds until the CLEAR/OFF pad is
touched. This continuous 6 second beep
may be canceled.
To cancel the 6 second beep:
1. Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until the
display shows SF.
2. Touch the BROIL HI/LO pad. The displays
shows CON BEEP (continuous beep).
Touch the BROIL HI/LO pad again. The
display shows BEEP. (This cancels the one
beep every 6 seconds.)
3. Touch the START pad.
Loading ...
Loading ...
Loading ...