Loading ...
Loading ...
Loading ...
KEY DIMENSIONS AND SPECIFICATIONS
Description Top-Loading W'asher
Rated Voltage/Frequency 120VAC, 60Hz
Dimensions 27"(W) X 28 3/8"(D) X 4t 3/10"(H), 55 1/8"(H with lid open)
68.6 cm (W) X 72.1 cm (D) X 105.0 cm (H), 140 cm (H with lid open)
Net W'eight 137.3 Ibs. (62.3kg)
CHOOSE THE PROPER LOCATION
• installing on carpeting and soft tile surfaces is
not recommended.
• Never install the washer on a platform or weakly
supported structure.
result in damage to property or serious bodily harm.
CLEARANCES
seriousinjury,fire, electric shock,or death.
warning can cause seriousinjury, fire, electric shock,or
death.
• To reducethe riskof electricshock, do not instali the
washer in humid spaces.Failureto follow this warning can
cause seriousinjury,fire, electric shock,or death.
• Toensure properair flow, do not block the large opening
on the bottom of the washer with carpeting or other
materials.
• Do not removegroundprong.Do notusean adapter or
extensioncord.Plug into a grounded3-prongoutlet. Failure
to follow thiswarning can causeseriousinjury, fire, electric
shock,or death.
NOTE:Installingthe washer in a humidspace, or installingor
storingthe washer where it will be exposed to the weather or
freezing temperatures, may resultin rustor other damage that
is not covered by the produd warranty.
PowerOutlet
• The power outlet must be within 60 in. (1.5m) of either side
of the washer.
• The appliance and outlet must be positioned so that the plug
is easily accessible.
• Do not overload the outlet with more than
one appliance.
• The outlet must be grounded inaccordance with current
wiring electric codes and regulations.
• Time-delay fuse or circuit breaker isrecommended.
NOTE: It is the personal responsibility and obligation of the
product owner to have a proper outlet installedby a qualified
servicetechnician.
| FLOORING
• Tominimize noiseand vibration,the washerMUST be
installedon a solidlyconstructed floor. Seethe NOTE to your
right.
• Allowable slope under the entire washeris a maximum 1in.
difference from side to side or from front to back.
7
(2,5cm) (686 cm) _ (2.5cm)
To ensuresufficient clearance for water lines and airflov,; allow
minimumclearances of at least 1 in. (2.5 cm) at the sides and
4 in.(10 cm) behind the unit. Be sureto allow for wall, door, or
floor moldingsthat may increasethe required clearances.
32 "
(811 cm)
28 sis"
(72,! cm}
55 _/s'*
(i40 cm)
(with open _id)
3/2"
(9 cm}
Minimum vertical space from floor to overhead
shelves, cabinets, ceilings, etc., is 56 in.
NOTE: The washer must be installed on firm flooring
to minimize vibration during the spin cycle. Concrete
flooring is best, but a wood floor is sumcient, provided
it is built to FHA standards. The washer should not be
installed on rugs or exposed to weather.
Loading ...
Loading ...
Loading ...