Loading ...
Loading ...
Loading ...
16
R-807 NETWORK AV RECEIVER
HDMI has the capability to support standard,
enhanced, or high-denition video plus standard to
multi-channel surround-sound audio. HDMI features
include uncompressed digital video, a bandwidth of up
to 2.2 gigabytes per second (with HDTV signals), one
connector (instead of several cables and connectors),
and communication between the AV source and AV
devices such as DTVs.
This main unit is also compatible with the DeepColor
and x.v.Color feature (x.v.Color is trademarks of Sony
Corporation).
HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing, LLC.
•
Check the setup of the connected component
if an image is poor or there is no sound from a
component connected via the HDMI cable.
•
Audio signals (sampling frequency, bit length,
etc.) transmitted from an HDMI jack may be
suppressed by the connected component.
•
When the connected component is not
compatible with copyright protection technology
(HDCP), the image and the sound from the HDMI
TV OUT jack may be distorted or may be not
output. In this case, check the specication of the
connected component.
•
Regardless of which input is selected for the
system, the video signal from the HDMI input jack
(BD, DVD, SAT) that was last selected is output
from the HDMI TV OUT jack.
Note
ConrmingtheHDMIcontrolfunctions
To use the HDMI control functions properly, it is
recommended to conrm the HDMI control functions
usable with each connected component by performing
the following operations.
1
Turn on all the components connected with HDMI
cables.
2
Turn the TV off to standby mode.
•
Conrm that all the components are turned off.
3
With all the components off, start playback of a
device (connected with HDMI cable).
4
Conrm that all the components are turned on and
the inputs of the main unit and TV are switched
automatically.
Connecting with a non-HDMI TV
If your TV does not have an HDMI connector, or if
your TV does have an HDMI connector but you are
connecting some source devices with only composite
video connectors, use a composite video cable (not
included) to connect the composite Monitor Out
connector to your TV’s composite video connector.
Composite
VIDEO IN
Composite Video Cable
(not supplied)
TV
Rear Panel
•
The on-screen display (OSD) only appears
through the Composite Monitor Out connector.
If you want to use the main unit's OSD menus
you will need to connect its Composite Monitor
Out connector to your TV even if you are not
connecting any composite video source devices
to the system.
Note
Loading ...
Loading ...
Loading ...