Loading ...
Loading ...
Loading ...
223
The Setup Menus
8
BUTTON/DIAL SETTING
AF-ON
If AF-ON is selected, you can press the control instead of keeping
the shutter button pressed halfway.
MODELING FLASH
If MODELING FLASH is selected when a compatible shoe-mount-
ed ash unit is attached, you can press the control to test- re the
ash and check for shadows and the like (modeling ash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to lock ash
output according to the option selected for F FLASH SETTING>
TTL-LOCK MODE (P 153).
n FACE SELECT op
n FACE SELECT op can be enabled
or disabled by pressing the button to
which n FACE SELECT op is assigned.
Enabling n FACE SELECT op allows
the focus stick (focus lever) or (during
view nder photography) touch controls
(P 24) to be used to select the face
that will be used for focus.
FACE SELECT ON
The following features can be accessed using the focus stick or
during view nder photography when n FACE SELECT op is
enabled:
•
The face used to set focus can be selected using the focus stick.
To switch from face detection to manual focus-area selection,
press the center of the focus stick (focus lever) (P 70). Press
again to re-enable face detection.
•
The touch screen (monitor) or focus stick can be used to select
the face used to set focus during view nder photography.
Loading ...
Loading ...
Loading ...