Loading ...
Loading ...
Loading ...
Cleaning and maintenance
63
EN
4.6 Extraordinary maintenance
Replacing the internal light bulb
Replacing the internal light bulb
1. Unscrew bulb protector 1, anticlockwise.
2. Replace the bulb 2 with one of the same
type (25W). Use only oven bulbs
(T 300°C).
3. Re-fit bulb protector 1.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an omnipolar switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not heat up:
• Check whether it has been set in “demo”
mode (for further details see “Settings”).
The controls do not respond:
• Check whether it has been set to “control
lock” mode (for further details see
“Settings”).
The cooking times are longer than those
indicated in the table:
• Check whether it has been set to “eco-
logic” mode (for further details see
“Settings”).
After the automatic (pyrolytic) cleaning
cycle it is not possible to select a function:
• Verify whether the door lock has
deactivated. If not, the appliance has a
safety device that does not allow
functions to be selected while the door
lock is active. This is because the
temperature in the oven cavity is still too
high to allow any type of cooking.
Live parts
Danger of electrocution
• Unplug the appliance from the power
supply.
Loading ...
Loading ...
Loading ...