Loading ...
Loading ...
Loading ...
,
,
Secure latch stand bracket underneath the latch lock
lever. See figure 5.
Assemble the cart tray, cart bed braces and wheel
support together using eight 5/16" truss head bolts
and 5/16" nylock nuts. Tighten nuts after all bolts are
in place. See figure 5.
(E)
(G)
FIGURE 5
8. Assemble the front tongue on top of the rear tongue
using three 3/8" x 3" hex bolts and 3/8" nylock nuts.
See figure 7.
HINT: For easier assembly, support the rear tongue with
a block of wood.
HITCH PIN
3/8" x 3" \
HEX BOLT
TONGUE
: (FRONT)
3/8" HEX f/€_
LOCK NUT ' BLOCK 1/8" HAIR
COTTER PiN
FIGURE 7
22. Attach the plastic elbow to the top of the engine
housing using four 5/16" x 3/4" hex bolts (self tapping)
and nylon washers. See figure 8.
HINT: Push in on hex bolts as you tighten to form threads.
23. Connect the hose adapter to the engine housing by
fastening three wing nuts to the pre-assembled bolts
in the engine housing. See figure 8.
7,
Attach the hitch bracket to the front tongue using two
3/8" x 1" bolts and 3/8" nylock nuts. See figure 6.
TONGUE
(FRONT) 3/8" x 1"
/ HEX BOLT
HITCH
BRACKET
3/8" NYLOCK NUT _ _
FIGURE 6 FIGURE 8
10
Loading ...
Loading ...
Loading ...