Loading ...
Loading ...
Loading ...
en Troubleshooting
54
Fault Cause Troubleshooting
Detergent residue in the ap-
pliance
The lid of the detergent dis-
penser is blocked by the tab
and will not open.
▶ Position the tab in the detergent dis-
penser crosswise, not vertically.
Tabs are used in the quick
or short programme. Dissolv-
ing time of the tab is not at-
tained.
▶ Select a more intensive "Pro-
gramme" →Page19 or use
"Powder detergent" →Page31.
Washing effect and dissolv-
ing performance are re-
duced after a prolonged
storage time or detergent is
very lumpy.
▶ Change your "detergent"
→Page31.
Water marks on plastic
parts.
Due to laws of physics
droplet formation on plastic
surfaces is unavoidable.
After drying water marks are
visible.
▶ Select a more intensive pro-
gramme.
→"Programmes", Page19
▶ Position tableware at an angle.
→"Arrange tableware", Page35
▶ Use rinse aid.
→"Rinse aid", Page30
▶ Set the water softening system
higher.
Wipeable or water-soluble
coatings are present inside
the appliance or on the door.
Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.
▶ Change your "detergent"
→Page31.
▶ Clean the appliance mechanically.
White coating is deposited in
the appliance interior.
1. Set the water softening system cor-
rectly.
In most cases you will need to in-
crease the setting.
2. Change your detergent if required.
Special salt dispenser is not
screwed tight.
▶ Screw the special salt dispenser
tight.
Stubborn white coatings are
present on tableware, inside
the appliance or the door.
Detergent substances are
deposited there. These coat-
ings cannot generally be re-
moved with chemicals.
▶ Change your "detergent"
→Page31.
▶ Clean the appliance mechanically.
The hardness range is set in-
correctly or the water hard-
ness is greater than 62°E
(8,9mmol/l).
▶ Set the Water softening system to
the water hardness or add special
salt.
Loading ...
Loading ...
Loading ...