Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE
CARE & MAINTENANCE TASK
Check for Loose fasteners and parts
Check for damaged or worn parts
Clean unit and labels
Clean air filter
Replace spark plug
GENERAL RECOMMENDATIONS
The warranty on this unit does not cov-
er items that have been subjected to
operator abuse or negligence. To re-
ceive full value from the warranty, the
operator must maintain unit as instruct-
ed in this manual. Various adjustments
will need to be made periodically to
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of Operation
Yeaffy
• Clean the cover and the area around
it to keep dirt and debris from falling
into the carburetor chamber when
the cover is removed,
• Remove parts as illustrated.
o Wash the filter in soap and water.
° Allow filter to dry.
• Replace parts.
properly maintain your unit.
CHECK FOR LOOSE
FASTENERS AND PARTS
• SparkPlugBoot
- AirFilter
- HousingScrews
= Assist HandleScrews
• DebrisShieldScrew
CHECK FOR DAMAGED OR
WORN PARTS
,_Fi|ter
Cover
REPLACE SPARK PLUG
Replace the spark plug each year to
ensure the engine starts easier and
Refer replacement of damaged/worn
parts to your Sears Service Center.
=Engine Stop Switch - Ensure switch
functions propedy bypressing and
holding the switch in the "Stop" posi-
tion, Make sure engine stops; then
restart engine and continue.
• Fuel Tank - Do not use unit iffuel tank
shows signs of damage or leaks.
• Debris Shield- Discontinue use of
unit if debds shield is damaged.
CLEAN UNIT & LABELS
• Clean the unit using a damp cloth
with a mild detergent.
° Wipe off unitwith a clean dry cloth.
CLEAN AIR FILTER
Do not clean filter in gasoline or other
flammable solvent to avoid creating a
fire hazard or producing harmful evap-
orative emissions.
A dirty air filter decreases engine per-
formance and increases fuel consump-
tion and harmful emissions. Always
clean after every 5 hours of operation.
runs better. Set spark plug gap at
.025 in. Ignition timing is fixed and
nonadjustable.
= Twist, then pull off spark plug boot.
= Remove spark plug from cylinder
and discard.
- Replace with Champion RCJ-8Y
spark plug and tighten with a 3/4 in.
socket wrench (10-12 ft.-Ibs).
* Reinstall the spark plug boot.
< •
Loading ...
Loading ...
Loading ...