Loading ...
Loading ...
Loading ...
,_ WARNING: To ensure safety and reliability, all
repairs -- withthe exception ofthe externally
accessible brushes -- shouldbe performedby a
qualified service technicianat a Sears store to
avoid risk of personalinjury.
BRUSH REPLACEMENT
See Figure 36.
BRUSH
BRUSH
CAP
BRUSH
CAP
BRUSH
ASSEMBLY
Fig. 36
Your saw has externally accessible brush assemblies
that should be periodically checked for wear.
Proceed as follows when replacement is required:
• Unplug your saw.
_WARNING: Failure to unplug your saw could
result in accidental starting causing serious
injury.
• Remove brush cap with a screwdriver. Brush
assembly is spring loaded and will pop out when
you remove brush cap.
• Remove brush assembly.
• Check for wear. Replace both brushes when
either has less than 1/4 in. length of carbon
remaining. Do not replace one side without
replacing the other.
• Reassemble using new brush assemblies. Make
sure curvature of brush matches curvature of
motor and that brush moves freely in brush tube.
• Make sure brush cap isoriented correctly
(straight) and replace.
• Tighten brush cap securely. Do not overtighten.
28
Loading ...
Loading ...
Loading ...