Loading ...
Loading ...
Loading ...
NOTES AND INSTALLATION
IMPORTANT: REFER TO YOUR VEHICLE OWNER’S MANUAL
TO DETERMINE:
Location of the fuse box
How to access the fuse box
The type of fuse tap required
It is highly recommended that you have a quick read of the installation
instructions in this user guide. If you are not comfortable with the
process please seek further assistance from an authorised technician.
Since power to your dashcam will be running via a power cable from
the fuse box you will need to determine your vehicle’s fuse box location.
Most vehicles have a fuse box underneath the dashboard on the driver’s
side which is easily accessible below the steering column (behind a
removable panel). However the location does vary between vehicle make
and model.
There are 4 types of fuse tap cables included in this kit. Check to see if
these fuses suit your vehicle’s fuse box. If none are suitable you will need
to purchase the correct fuse to attach the hardwire kit to your vehicle’s
power source.
Note: You may need to consult your vehicle manufacturer for
instructions on how to remove vehicle ittings (example A pillar
cover) for routing the hardwire kit cables inside your vehicle and for
where airbags are located so that these are not obstructed in case of
deployment by routed cables.
Installation of DSH-HWK is recommended to be performed by a
technician. Working with your vehicle’s power system can be dangerous
to both you and your vehicle if you do not know what you are doing.
If you have any doubts please consult a professional. Dashmate
recommends professional installation only of this dashcam hardwire kit.
IMPORTANT: Refer to your dashcam owner’s manual for initial
installation of your dashcam in your vehicle.
DSH-HWK is a kit that allows for the provision of constant power from
your vehicle battery to your dashcam. Any issues with your dashcam
should be referred to your dashcam’s manufacturer.
4
Loading ...
Loading ...
Loading ...