Loading ...
Loading ...
Loading ...
6
The ideal position of the Rangehood is as follows:
1.Height above cooking surface – min. 650mm
2.Distance from cooking surface to Rangehood mounting bracket bottom screw holes:
Model: ACH12BBQ
Top mounting holes – Min1085mm
Bottom mounting holes – Min 710mm
Model: ACH12BBQB
Mounting holes – Min 1010mm
Mounting bracket is attached and part of the medium rangehood motor cover.
Note: Rangehood must be level, if not rangehood will not operate correctly.
Model:ACH12BBQ
1.Using a tape measure mark the top mounting holes C/L, min 1085mm, above cooking surface. This line
should be level.
2.Using a tape measure mark the bottom mounting holes C/L 375mm, down from the line discussed in item 1.
This line should be level.
3.Find the center of the BBQ cooking surface and using a plumb bob, mark this center on the above lines
discussed in Item 1 & 2.
4.Mark the top mounting holes on the line discussed in Item 1. This mark should be 155mm either side of the
center mark discussed in Item 3.
5.Mark the bottom mounting holes on the line discussed in Item 2. This mark should be 380mm either side of
the center mark discussed in Item 3.
Model:ACH12BBQB
1.Using a tape measure mark the mounting holes C/L, min 1010mm, above cooking surface. This line should
be level.
2.Find the center of the BBQ cooking surface and using a plumb bob, mark this center on the above lines
discussed in Item 1.
3.Mark the mounting holes on the line discussed in Item 1. This mark should be 230mmeither side of the
center mark discussed in Item 2.
Warning:
1.Your rangehood is very heavy. Please use suitable fixings and hole size for this weight.
ACH12BBQ – 38Kg
ACH12BBQB – 38Kg
2.If unsure of which fixings please discuss with your hardware stockist or rangehood installer.
3.Using two people, lift rangehood into place and secure to the wall using selected hardware. Ensure
rangehood is level.
Loading ...
Loading ...
Loading ...