Loading ...
Loading ...
Loading ...
12
BAFFLE FILTERS
The baffle filters fitted by the factory are intended to filter out residue and grease from cooking. They are
required to be kept clean and should be cleaned after every 30 hours of use or more often if required or after
heavy cooking.
Note: Always turn the Range hood power off at the point before removing filters.
To Remove
Lift latch and gently pull down front of baffle filter and remove.
To Clean
1.Use warm soapy water and a soft cloth or put into dishwasher on a ‘normal’ cycle.
2.Thoroughly clean and wipe down the inside of Range hood canopy.
To Fit
1.Position the rear of the baffle filter into the 2 slots.
Gently rotate the baffle filter into position, lift latch and push into place and release latch
NOTES:
If you clean the baffle filter in the dishwasher: load only the baffle filter and no other items as food particles
from dishes can fasten in the filter.
-DO NOT let dirt build up on the hood
-DO NOT use steel wool or steel brushes to clean the hood
-DO NOT leave salt solutions, disinfectants, bleaches or cleaning compounds on the hood for any length of
time as they may damage the stainless steel. Rinse after use with clean water and wipe dry with a clean cloth
Replacing the LED lights
The illumination is designed for use during cooking and not for prolonged general illumination of your
outdoor kitchen. Prolonged use of the lights may reduce the life time of the LED lights.
WARNING: Do not touch or change lights while the hood is operating.
Use only the same LED lights as the original specification. Re-placement lights are available through
the dealers.
1. Take off the filters from hood.
2. Take off the two screws and replace the LED lights.
Loading ...
Loading ...
Loading ...