Loading ...
2
IMPORTANT: PLEASE READ AND FOLLOW
1. Before beginning, please read these instructions completely and carefully.
2. Do not remove permanently a xed labels, warnings, or plates from
product. This may void the warranty.
3. Please observe all local and national codes and ordinances.
CAUTION: Before proceeding with the conversion, shut o the gas
supply to the appliance prior to disconnecting the electrical
power.
This conversion kit shall be installed by a
quali ed service agency in accordance with the
manufacturer’s instructions and all applicable
codes and requirements of the authority having
jurisdiction. If the information in these instructions
is not followed exactly, a re, explosion or
production of carbon monoxide may result
causing property damage, personal injury or loss
of life. The quali ed service agency is responsible
for the proper installation of this kit. The
installation is not proper and complete until the
operation of the converted appliance is checked
as speci ed in the manufacturer’s instructions
supplied with the kit.
WARNING
GAS CONVERSION
To convert a grill or accessory burners from natural to LP/Propane gas or
LP/Propane to natural, you must use the conversion kit supplied by the
manufacturer. When converting to Natural Gas, use the PRONGK1 kit for
30”/36” / 42”/54” Grills, Power Burner and Side Burner models. When
converting to LP/Propane, use the PROLPK1 kit for 30”/36” / 42”/54” Grills,
Power Burner and Side Burner models. Conversions should only be done by
an authorized service technician.
PRONGK1 Conversion Kit Part List
(1) Elbow 1/2 NPT, 90 degree Pipe Elbow
(1) #41S Ori ce, Main Burner 36” Model
(2) #44S Ori ce, Sear Burner 36” Model
(2) #50 Ori ce, IR Rotis 30”/36”/54” Models
(2) #68 Smoker Ori ce
(3) #41L, 1.375 Ori ce, Main Burner 30”/42”/54” Models
(1) #42S Ori ce, Sear Burner 30”/42”/54” Models
(1) 4/11 Regulator
(2) #185 Side Burner Ori ce
(1) #50L Ori ce, Inner Power Burner
(1) #35L Ori ce, Outer Power Burner
(1) Valve Valve, Main Burner, Red Spring
(1) 068907-000 Conversion Kit Instructions
(1) PF030427 Conversion Label
(1) 071523-000 Red Natural Gas Label
(1) #48 Ori ce, #48
PROLPK1 Conversion Kit Part List
(1) Elbow 3/8” Flare to 1/2” FIP Pipe Elbow
(4) #53 Ori ce, Main Burner 36” Model
(1) #55 Ori ce, Sear Burner 36” Model
(2) #57 Ori ce, IR Rotis 30”/36”/54” Models
(2) #77 Ori ce, Smoker
(3) #53L, 1.375 Ori ce, Main Burner 30”/42”/54” Models
(2) #54 Ori ce, Sear Burner 30”/42”/54” Models
(1) 2-stage Regulator w/Hose
(2) #115 Side Burner Ori ce
(1) #57L Ori ce, Inner Power Burner
(1) #50L Ori ce, Outer Power Burner
(1) Valve Valve, Main Burner, Red Spring
(1) 068907-000 Conversion Kit Instructions
(1) PF030427 Conversion Label
(1) 071522-000 Yellow LP Gas Label
(1) #56S Ori ce, #56S
• 1 ¼” open end wrench or large channel locks (removing / installing
NG regulator)
• Phillips screwdriver (removing installing rear panel / adjusting air
shutters)
• ½” deep socket and ratchet (removing / installing gas ori ces on
burner valves)
• ½” open end wrench (removing / installing rotisserie burner
ori ce)
• 7/16” open end wrench or socket (removing / installing manifold
pipe)
• 3/8” socket (to remove the heat shield)
• 3/32” blade slot screwdriver - 3” long shaft (adjusting burner valves
to obtain proper minimum ame)
• 5/8” open end wrench (removing / installing LP regulator & hose
to are tting)
• Pipe wrench (removing / installing the LP – brass 90 degree ½” x
3/8” are elbow and NG – 90 degree street elbow connection at
manifold)
• Pipe dope, yellow Te on gas tape, etc (sealing gas connec tions)
Tools Needed
*NOTE: All parts in the kit may not be used depending on model being converted
Loading ...
Loading ...
Loading ...