Loading ...
Loading ...
Loading ...
23
Temperature knob
(potentiometer)
Function
selector knob
A
U
T
O
P
Figure 14
SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)
Way 1: SETTING THE COOKING TEMPERATURE WITH THE TEMPERATURE KNOB
(POTENTIOMETER)
NOTE: The temperature knob (potentiometer) turns to right and left only to symbols
+ and -. Forcing the turning could irreparably damage the temperature knob.
The temperature set is shown on the electronic
programmer display and can be varied, with 5 °C
intervals, by turning the potentiometer knob.
During the cooking the oven temperature is measured
by a sensor inside the cavity and is shown on the
programmer display.
1. SELECTING THE COOKING FUNCTION
Turn the selector knob to the cooking function
required.
The pre-set temperature appears on the programmer
display. °C ashes on the display for 3 seconds.
The heating elements start cooking immediately.
2. SETTING THE COOKING TEMPERATURE
Turn the potentiometer knob clockwise to
increase the temperature or anticlockwise to
reduce it.
The maximum temperature which can be set is
250°C while the minimum temperature is 50 °C.
Note: When °C becomes steady the value shown on
the display indicates the oven cavity temperature.
Caution: If a temperature below the minimum value
(50 °C) is set the system switches off automatically
and OFF appears. In this case repeat the procedure
from point 2.
3. SWITCHING OFF
Turn the selector knob to position 0 (oven OFF).
The programmer display shows the time.
Loading ...
Loading ...
Loading ...