Loading ...
Loading ...
Loading ...
i iiii ii ]1 ii
CUSTOMER RESPONSIBILITIES
wl iii i
MAINTENANCE SCHEDULE
iiiiiiiiii
i
Fill in dates as you complete regular service Before After Every Every Every
Use Use 5 Hrs. 25Hrs. Season
Clean unit and labels _,,
Check for damaged or worn parts
Check for loose fasteners and parts
Check for Chain Sharpness
Guide Bar Maintenance
Check Vibrations Mounts _,
Check Clutch Drum Sprocket _,
Clean Air Filter
Service/Replace Spark Plug
ClearVInspect Spark Arrestor Screen and inspectMuffleri
iii i
Check Guide Bar Lube _,
Filter in Fuel Tank
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that have
been subjected to operator abuse or negligence. T9o
receive full value from the warranty, the operator must
maintain unit as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your unit.
All adjustments in the "Service and Adjustments" section
of this manual should be checked at least once each
season.
• Once a year, replace the spark plug, replace air filter
element and check guide bar and chain for wear. A
new spark plug and a clean/new air filter element
assures proper air-fuel mixture and helps your engine
run better and last longer.
• Follow the maintenance schedule in this manual.
tJ
BEFORE EACH USE
Service Dales
CHECK FOR DAMAGED/WORN PARTS
The following damaged/worn parts should be referred to
your Sears Service Center.
NOTE: It is normal for a small amount of oil to appear
under the saw after engine stops. Do not confuse this
with a _eaking oil tank.
WARNING:
DISCONNECT THE SPARK PLUG BEFORE
PERFORMING MAINTENANCE EXCEPT
FOR CARBURETOR ADJUSTMENTS.
INSPECT THE ENTIRE UNIT. REPLACE
DAMAGED PARTS. CHECK FOR FUEL
LEAKS AND MAKE SURE ALL FASTENERS
ARE IN PLACE AND SECURELY FASTENED.
• On/Stop Switch - ensure stop switch functions properly
by moving the switch to the "Stop" position and assure
that engine stops, then restart your engine and continue.
• Fuel Tank - discontinue use of chain saw if fuel tank
shows signs of damage or leaks.
• Oi! Tank - discontinue use of chain saw if oil tank
shows signs of damage or leaks.
• Chain Catcher - replace chain catcher if bent, cut, or
damaged in any way.
LUBRICATION CHART
(_) _,i,_r_
Cap _--Jb_
C) Craftsman chain saw bar oil
-18-
Loading ...
Loading ...
Loading ...