Loading ...
Loading ...
Loading ...
KNOW YOUR PRESSURE WASHER
Read this owner's manual and safety rules before operating your cleaning system.
Compare the illustrationswith your cleaning system to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference
Spray Gun
System Rinse, Detergent and
Chemical Reservoirs with
Internal Filter
High Pressure Hose
Recoil Starter
Nozzle Extension
with Q
Air
Fuel Cap
Hose Reel
Choke Lever and
Throttle Control Lever
Oil Fill Cap/Dipstick
High Pressure Outlet
Water Inlet
Air Filter - Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Choke Lever - Used to help start a cold engine.
Dial-A-Cleaner TM Selector Knob - Selects any one
of three chemicals or the clean water system rinse.
Fuel Tank i Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
High Pressure Hose - Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet - Connection for high pressure
hose.
Hose Reel -- Used for storing hose while unit is not in
use. Hose must be detached from pump and spray
gun before storage.
Nozzle Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Pump
Oil Fill Cap/Dipstick - Fill engine with oil here See
page 7 for oil recommendations and filling instructions.
Pump - Develops high water pressure.
Recoil Starter - Used for starting the engine.
Spray Gun - Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Spray Tips -- Chemical injection, 0°, 15%and 40°: for
various high pressure cleaning applications.
System Rinse, Detergent and Chemical Reservoirs
with Internal Filter - Used to provide detergent or
other chemicals to the low pressure water stream.
Throttle Control Lever - Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet - Connection for garden hose.
5
Loading ...
Loading ...
Loading ...