GE - General Electric JGSP30GEP4BG GE 30" gas slide-in pyro range

User Manual - Page 21

For JGSP30GEP4BG.

PDF File Manual, 31 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Set the Oven for Cleaning
The range must be completely cool
in order to set the self-clean cycle,
1. Push the CLEAN button_
Turn SET knob in the clockwise
direction about t/2 turn,. The
display will show "3:30?'
The words "CLEAN TIME"
will be displayed on the left.
Within 20 seconds, the words
"CLEAN LOCK" will be
displayed on the right.
Note: You can find out when the
clean cycle will be finished by
pushing the STOP TIME button.
The word "DOOR" is displayed
when you try to set a clean cycle
with the door' open or when the
oven temperature is too high.
To Set a Delayed Start
1, Push STOP TIME button.
2. Turn SET knob to time of day
when you wish cleaning to be
completed (must be more than
3'/-,hours later' than current
time of day)_
3, Push the CLEAN button
4, Turn SET knob in the clockwise
direction about 1t2 turn,
The words "DELAY CLEAN"
will be on in the display until the
clean cycle starts, After the clean
cycle starts, the word "CLEAN"
will be on in the display.
Note: During a delayed self-clean
operation, you can find out when
the oven turns on by pushing and
holding the CLEAN button,,
To Stop a Clean Cycle
I. Press the CANCEL button
2, Wait until the oven has cooled
below locking temperature (about
20-30 minutes) and the word
"LOCK" is off in the display
You witt not be able to open the
door right away unless the oven
temperature is at a safe level. If
you cannot open the oven door
immediately after' the word
LOCK _,oes off, wait one
minute and try again.
After Self-Cleaning
1. When a clean cycle is finished,
the word "CLEAN" will be off
in the display_
2. "Wait until the oven has cooled
below Iocldng temperature (about
20-30 minutes) and the word
"LOCK" is off in the display
You will not be able to open the
door unless the oven temperature
is at a safe levd If you cannot
open the oven door immediately
after' the word "LOCK" goes off,
wait about one minute and try again.
You may notice some white ash
in the oven, Just wipe it up with
a damp cloth,.
If' white spots remain, remove
them with a soap-filled steel wool
pad, Be sure to rinse thoroughly
with a vinegar and water mixture,
These deposits are usually a salt
residue that cannot be removed
by the clean cycle,
If' the oven is not clean after one
clean cycle, repeat the cycle
(continued next page)
!
i
i
I
l
Qt_
=
Ct_
=
21
Loading ...
Loading ...
Loading ...