Loading ...
Loading ...
Loading ...
ERectronic Controlts (oomin ed)
Automatic Oven Timer
The oven timer will automatically
start and stop your oven cooking or'
self=cleaning operation for you
For automatic oven cooking:
1, Push COOK TIME. button
2, Turn SET knob to set length
of' baking time
3. Push BAKE button
4. Turn SET knob to set desired
temperature.
When cook time is reached,
the End-of-Cycle Tone (3 long
beeps) wilt sound and the oven
wilt turn off.
During automatic cooking:
*You can push the STOP TIME
button to find out when tile End-
of=Cycle Tone (3 long beeps) will
sound and the oven wilt turn off
o You can push the CLOCK button
to display time of day without
cancelling the oven operation
To Delay Starting an
Automatic Oven Operation
If a delayed cooldng operation
is desired:
1. Push COOK TIME button
2. Set length of baking time with
SET l,:not>
3. Push STOP TIME button.
4, Turn SET knob to time of day
when baking should be completed
Do not set a stop time that is less
than the length of cooking time
plus the current time of day
5. Push BAKE, button
6, Turn SET knob to desired
temperature,
When stop time is reached,
the End-of=Cycle Tone (3 long
beeps) wilt sound and tile oven
will turn off
Caution: Never let food sit in the
oven tbr more than t hour betbre
cooldng starts. Room temperature
is ideal for the growth of harmful
bacteria, Be sure oven light is off
because heat fl'om the bulb will
speed bacteria growth
Note: You can push the STOP
TIME button to find out when the
oven will turn off. Push and hold
the COOK TIME button to find
out when the oven wilt turn on..
ff a delayed self-cleaning oven
operation is desired, see page 21.
How to Change
a Program
When a function has been
entered, you can recall what
has been programmed by
pushing the corresponding
function button. The messages
in the display show you which
function is currently being
displayed. While the function
is displayed, you can change it
with the SET knob. You can
change any programmed
function at any time.
Tones
Endmf-Cycle Tone (3 long beeps_
one second on, one second off):
shows that a timed oven operation
has reached STOP TIME or"that
the Minute/Second Timer has
counted down..
Attention Tone (series of short
beeps, t/4-second on, 1/4-second
off, until proper response is given):
will sound if oven has only been
partially programmed For
example, if you have selected a
cook time but no temperature, you
will hear' the Attention Tone until
you select a temperature or' push
CANCEL,,,
Notification Tone (single, one-
second beep): indicates oven has
stabilized at selected temperature.
Key 'lone (single, 1/10-second beep):
sounds when any button is pushed
Function Error Tone (series of
very rapid beeps, 1/8-second on,
l/4-second off): display will show
a failure code. Cancel Function
Error Tone by pushing the
CANCEL button. If the Function
Error Tone starts again (after about
i5 seconds), call for' service,,
Disconnect the range electrical
supply to stop the tone,,
If tile function en"or occurred while
you were programming the
Electronic Control, push the
CANCEL. button and try again.,
To Cancel the Tone...If you don't
want an audible tone when you
push a button, you can eliminate
the Key Tone by pushing and
holding the CANCEL, button
until you hear a short beep
(in approximately two seconds),
To activate the tone again, push
and hold the CANCEL button once
more until you hear a short beep,
Cancelling or activating the tone
should only be done when there is
no oven operation programmed
Pushing the CANCEL button will
clear all functions except the Clock
and Minute/Second Timer'.
11
ra_
Qr_
_m
ยข3
Loading ...
Loading ...
Loading ...