Sunstone EMCHDZ42LP 42 Inch Stainless Steel Built-In Grill

PRODUCT MANUAL - Page 4

For EMCHDZ42LP. Series: SUNSTONE SERIES

PDF File Manual, 18 pages, Read Online | Download pdf file

EMCHDZ42LP photo
Loading ...
Loading ...
Loading ...
Page 4
CLEARANCES AND PLACEMENT
Your grill is SELF-RIMMING, meaning the lip of grill rests on top of the counter edge around the cut-out
with the front of grill which is Free-Hanging from counter top. Because of this, there is No Need for any
Trim-Kit like with many other grill in the market.
Maintain 24” Clearance from any Combustible Materials in ANY direction of Grill.
If any combustible materials within 24” distance, must have Heat Barrier like Grill Jacket, or other
Non-Combustible type like Bricks, Hardy Board, Metal.
Orient the grill so the Prevailing winds are not blowing into the rear or side of grill.
Windy Area
Positioning your grill in your backyard is more often thought of how it is pleasing to the eye, but more
important than this is how that it functions correctly. Unlike an indoor appliance, your grill has to combat
many outside weather influences in all manner of weather related instances, most severely is Wind.
Maintain proper Prevailing wind, grill direction – with the front of grill facing in to the wind, and the
back of grill in the direct wind is blowing. If direction of wind is unclear, or difficult to combat even
with preventative measures, then always grill with the hood open, and when hood is closed –
always be within close proximity to grill and monitor it that it does not overheat.
If wind or breeze is in the direction of back of grill, you must erect partition wall of 14” height so
that the top of grill hood is covered by several inches. If this is not done, you must grill with hood
open and or when hood is closed stand in close area to grill and monitor if the grill overheats.
Minimum Distances
From Back Cut-Out Grill Line to Wall 6-1/2" Min. Clearance
From Counter to Outdoor Vent Hood 36" Min. Clearance
From Floor to Counter Top 34" Min. Clearance
From Grill to Vent Hood Width 4”-6" Min. Clearance
From Appliance to Appliance 12" Min. Clearance
From Appliance to Combustible Material
24" Min. Clearance
ATTENTION: Do Not Build Enclosure around Firebox of Grill, Grill Free-Hangs from Counter Top,
DO Not Build Shelf below Grill of any kind. Must have Minimum of Two Vents for this Grill, for
Natural Gas place in High Position, and for Liquid Propane place in Low Position.
ATTENTION: Take special precaution when installing grill in open Breezy area, check the direction
of Prevailing Wind, if the back of the grill is facing any oncoming wind or breeze, be sure to protect
the back of
the
grill, and erect
a partition wall, or only use grill with hood open on breezy days.
Loading ...
Loading ...
Loading ...