Loading ...
Loading ...
Loading ...
8
(11), starting 5-7 mm from the ends.
1.3 Battery connection (if present)
• Electric key ignition models
Connect the battery cable to the general wiring connector on the lawn-
mower.
• Electric push-button ignition models
3.2b, “III - “IV”).
2. CONTROL DESCRIPTION
NOTE - The meanings of the symbols on controls are explained in
the previous pages.
2.1 Throttle
of a throttle.
2.2 Blade brake
the handle for ignition and during lawnmower operations.
.
IMPORTANT - The blade must stop within a few seconds of when the
lever is released; if you notice that more time is required for it to stop,
contact a Specialised Centre immediately.
2.3 Drive lever (if provided)
.
2.4 Cutting height adjustment
DO THIS WHEN THE BLADE IS STOPPED.
3. GRASS CUTTING
3.1 Fastening the grass-catcher
Lift the stone-guard and fasten the grass-catcher (1) correctly as shown
in the illustration.
3.2 Engine ignition
During ignition, follow the instructions in the engine manual.
3.2a
• Manual ignition models (“I”)
the knob on the ignition cable (2).
• Electric key ignition models
ignition key (3).
3.2b
• Electric push-button ignition models (“III - “IV”)
-
NOTE Keep pulling the engine / cutting means brake or the engine
will stop.
– Press and hold the starter button until the engine switches on (6).
3.3 Grass cutting
directions at the same height.
• If there is a grass-catcher with contents indicator device (if appli-
cable): while working, with the blade in motion, the indicator remains
lowers, it means that the grass-catcher is full and it must be emptied.
3.4 Emptying the grass-catcher
the sound of the lawnmower changes and the grass-catcher is no longer
keeping it in an erect position.
3.5 When work is finished
-
nect the spark plug cap (2).
• Electric key ignition models
• Electric push-button ignition models
WAIT UNTIL THE CUTTING MEANS STOPS before proceeding any
further.
3.6 Lawn care recomendation
mowing height for the growth conditions in the work area.
Keep in mind that the most grass is made up of a stem and one or more lea-
The following indications generally apply:
• for particularly high grass, initially mow at maximum admitted machine
height followed by a second mow after two or three days.
4. ROUTINE MAINTENANCE
MPORTANT - Routine and accurate maintenance is essential in maintain-
.
Store the lawnmower in a dry place.
1)
machine.
2)
drying and causing problems the next time the lawnmower is used.
select the lowest cutting height and always stand behind the lawnmower
handle when cleaning
-
of the rust that would lead to corrotion of the metal .
5) If accessing the lower part is necessary, only tilt the machine on the
.
6) Do not drip petrol onto the plastic parts of the engine or the machine
-
by petrol.
Loading ...
Loading ...
Loading ...