Loading ...
Loading ...
Loading ...
7
C) DURING USE
-
ditions.
there is a thunderstorm risk.
7) Be extremely carefully when changing directions on slopes.
10) Be extremely careful when pull the lawnmower toward you.
11) Immobilise the blade if the lawnmower must be inclined for transport,
transported from or to an area that must be cut.
grass-catcher or stone-guard.
13) Do not tamper with or disable safety systems.
the engine.
16) Start up the engine carefully according to the instructions, keeping feet
away from the blade.
17) Do not incline the lawnmower for start up. Start up the machine on a
keep away from the discharge opening.
19) Do not start the machine when standing in front of the discharge open-
ing.
20) Do not lift or transport the lawnmower when the engine is running.
21) Stop the engine and disconnect the spark plug cable:
-
ging the chute:
inspections).
22) Stop the engine:
fuel supply when mowing is done, following the instructions in the engine
manual.
24) When mowing, always keep a safe distance from the rotary blades,
25) WARNING - If something breaks or an accident occurs during mowing,
-
and contact the medical authorities for any necessary health care. Carefully
should it not be seen.
-
maintenance, wear ear protection, make breaks during the work.
D) MAINTENANCE AND STORAGE
1) Keep all nuts and screws tight to be sure the equipment is in safe
working condition. Routine maintenance is essential for safety and for
2) Do not store the lawnmower with fuel in the tank in an area where fuel
3) Allow the engine to cool before storing the lawnmower in any enclosure.
5) Check the stone-guard and grass-catcher frequently for wear or de-
terioration.
6) If the fuel tank has to be emptied, this should be done outdoors once
the engine has cooled down.
8) Keep the blade balanced during sharpening. All work on the blade
(disassembly, sharpening, balancing, reassembly and/or replacing) are
parts. Parts must be replaced and not repaired. Use original spare parts.
Parts that are not of the same quality can damage the equipment and
impair your safety
E) TRANSPORTATION AND HANDLING
you must:
the weight and its distribution.
– use an appropriate number of people for the weight of the machine and
or collected.
2) During transport, fasten the machine securely with cables or chains.
OPERATING INSTRUCTIONS
For information on the engine and the battery (if supplied), read the
relevant manuals.
1. COMPLETE ASSEMBLY
NOTE - The number which precedes each paragraph links the refer-
ences in the text to the respective illustrations (listed on page 2 and
following pages).
NOTE - The machine can be supplied with some parts already as-
sembled.
WARNING - Unpacking and completing the assembly should be done
on a at and stable surface, with enough space for moving the ma-
chine and its packaging, always using suitable equipment.
Disposal of the packaging should be done in accordance with the
local regulations in force.
1.1 Handle assembly
Loosen the two lower nuts (1).
Return the lower part of the handle, which is made up of two pre-assembled
elements (2), to the work position and lock into place by means of the nuts
(1) and the lower knobs (3).
Fit the upper part of the handle (4) to the lower ones (2) by means of the
clamps (5), as shown.
The ring nuts (6) on the clamps (5) must be screwd so they keep the top
Hook the starter cable (7) to the guide spiral (8).
Tighten the nut (9) to secure the spiral 8).
Fit the cable clamp (10) as shown and secure the control cables.
1.2 Grass-catcher assembly
With the plastic part (11) upside-down, fasten the frame (12) to the plastic
part using the screws (13). Insert the frame (12) into the sack (14) and
Loading ...
Loading ...
Loading ...