Loading ...
Loading ...
Loading ...
Cleaning en
27
Hob
Clean the hob each time you use it. This will prevent
food remnants from becoming burned on. Do not clean
the hob until the residual heat indicator has gone out.
Remove boiled-over liquids immediately and do not
allow any food remnants to dry on.
Leave the metal grease filter in the appliance while you
clean the hob. Dirt and food remnants collect in the
metal grease filter and not in the appliance interior. You
can clean the metal grease filter in the dishwasher.
Clean the hob with a damp dish cloth and dry it with a
cloth to prevent limescale build-up.
Stubborn dirt is best removed with a glass scraper or
glass ceramic cleaner (available from retailers). Follow
the manufacturer's instructions.
You can obtain a suitable glass scraper (article no.
00087670) from our after-sales service or through our
online shop.
Using a special sponge for cleaning glass-ceramic
hobs achieves great cleaning results.
Ventilation system
The filter must be regularly cleaned or replaced in order
to guarantee efficient filtration of odours and grease.
Metal grease filter
The metal grease filter must be cleaned regularly.
:Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire.
Regularly clean the grease filter. Never operate the
appliance without a grease filter.
Activated charcoal filters
The activated charcoal filter should be replaced
regularly. The saturation indicator on your appliance will
tell you how frequently this needs to be done.
If you only use your appliance in air extraction mode,
change the acoustics filter as soon as it is dirty.
Saturation display
When the activated charcoal filters are saturated, an
audible signal sounds after the appliance is switched
off.
” lights up on the display.
Do not wait any longer to replace the activated charcoal
filters.
If you have replaced the activated charcoal filters, you
should reset the saturation indicator so that the ”
display goes out.
After the appliance has been switched off, ” lights up.
Press and hold the symbol for the ventilation system
until an audible signal sounds.
The activated charcoal filter saturation indicator has
now been reset.
Changing the activated charcoal filter (only in
circulating-air mode)
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
Notes
■ The activated charcoal filters and acoustics filters
are included with the appliance. When the activated
charcoal filters or acoustics filters need to be
replaced, they can be obtained from specialist
retailers, from our after-sales service or from our
online shop.
■ The activated charcoal filters and acoustics filters
cannot be cleaned or reactivated.
■ Only use genuine replacement filters. This will
ensure that the appliance performs optimally.
1. Remove the metal grease filter.
Notes
– Grease may accumulate in the bottom of the
container. Hold the metal grease filter level to
prevent grease from dripping out.
– Make sure that the metal grease filter does not
fall and damage the cooktop.
2. Remove the four activated charcoal filters or
acoustics filters and dispose of them properly.
Loading ...
Loading ...
Loading ...