Loading ...
Loading ...
Loading ...
Operating the appliance en
15
Manual hood control
You can control the ventilation setting manually.
Note: Using tall items of cookware may prevent the
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on
the cookware at an angle.
Activation
1. Touch the A symbol.
The ventilation system starts at the preset power
level.
2. Use the @ and A symbols to select the required
power level within the next 10 seconds.
The selected power level lights up.
3. Touch the A symbol to confirm the selected setting.
The ventilation system switched on.
Changing and switching off
Touch the A symbol and select the required power
level or set it to ‹ using the @ and A symbols.
Intensive setting
There are two intensive modes for the ventilation
system. If you activate the intensive settings, the
ventilation system works at maximum output for a short
time.
Activation
Touch the A symbol and select the required intensive
setting.
■ Intensive setting I: Touch the ˜ symbol. The
˜ display lights up. The setting is activated.
■ Intensive setting II: Touch the ˜ symbol. The
˜ display lights up. The setting is activated.
Note: After eight minutes, the appliance automatically
switches back to fan setting Š.
Changing and switching off
Touch the A symbol and select the required power
level or set it to ‹ using the @ and A symbols.
Automatic start
If you select a power level for a cooking zone, the
automatic start switches on. The ventilation system
switches on at a power level in accordance with the
respective power level for the cooking zones.
You can find out how to change this setting in section
~ "Basic settings".
Run-on function
The run-on function allows the ventilation system to
continue operating for a few minutes after the hob has
been switched off. This removes any remaining cooking
vapours. The ventilation system then automatically
switches off.
Activation
As standard, the run-on time is activated with a
maximum switch-off time. You can find out how to
change this setting in section ~ "Basic settings".
Note: The run-on function only switches on if at least
one cooking zone has been switched on for at least one
minute.
Deactivating
Manual
Touch the A symbol. The run-on function is switched
off.
Automatic
The run-on function is switched off in the following
cases:
■ The run-on time has elapsed.
■ The appliance is switched on again.
Loading ...
Loading ...
Loading ...