Loading ...
Loading ...
Loading ...
PAGE: 7 / 10
Slide the canopy up to ceiling and over
the two canopy screws on hanger
bracket. Rotate canopy clockwise, next,
while holding the canopy with one hand,
slide the canopy cover over the screws
and rotate clockwise until tight.
Note: Adjust the canopy screws as
necessary until the canopy and
canopy cover are snug.
Fig.11
Canopy Screw
Hanger Bracket
Canopy
Canopy Cover
Thread the blade screws through the
washer and blade into the blade bracket.
Tighten all blade screws securely.
Repeat to other blades.
Turn ON the electric circuit at the
main fuse or circuit breaker box.
191225
Fig.12
Blade Screw
Washer
Blade Bracket Set
Blade
Insert the blade bracket set onto the
fan motor assembly, then secure
them together by two blade bracket
set screws.
Slide Switch
Reverse
Forward
Fig.14
The slide switch on fan motor assembly sets direction of fan rotation.
Select the desired direction of fan rotation. Push the slide
switch left for " Forward" and right for "Reverse".
Note: Wait for fan to stop before reversing the direction
of blade rotation.
Blade Bracket Set Screw
Fig.13
Fig.15
Fig.16
Note:
1. This remote controller has memory function setting. The fan will operate at the same
speed and the fan light will stay at the same brightness as the last time the power supply
was turned off.
2. Compatible Wall Switch model no.:LUTRON / SKYLAPR / SFSQ-LFH-WH, the wall switch
only can turn on or turn off the light, but can not control dimming. Install Without Remote
Controller Fig.18.
Loading ...
Loading ...
Loading ...