Loading ...
Loading ...
Loading ...
Remote Controller
Before Use
Battery has been installed in the remote control.
Before use please unplug the transparent plastic
sheet which was inserted in the remote control.
NOTE: Remove the battery if the remote control is
not to be used for a month or more. Battery left in
the unit may leak and cause damage.
Instructions for the Use of the IR Remote Control
The buttons on the remote controller functions in the
same manner as those on the control panel on the front of the heater. Set the
timer by using the remote control.
Setting the Timer
1. Press the TIMER button until Set Time starts flashing. The default value is 3
hours.
2. Press the button to increase the
set time or the button to decrease the set time.
The timer can be set from
1 to 12 hours. The timer will set and execute after the LED display stops
flashing. The heater will shut OFF automatically when the set time is
reached.
3. To turn the timer OFF, follow step 1,
pressing the button to set the
time to 0. The timer feature will turn off when the LED stops flashing.
Loading ...
Loading ...
Loading ...