Loading ...
Loading ...
Loading ...
Operating Instructions
1. Plug the power supply cord into a grounded wall outlet. (120VAC,
60Hz)
Important: This heater is for use on
120 volts. This heater comes with a
grounded (three-prong) plug. The
grounded plug must be used with a
grounded outlet. Do not use an
adapter in a two-slot wall outlet unless
the ground plug of the adapter
properly connects to a building ground.
Using the heater without a properly
grounded outlet or adapter could
result in an electric shock hazard. The
cord has a plug as shown at A in the
following figure. An adapter, as shown
at C, is available for connecting
three-blade grounding
type plugs to two-slot receptacles.
The green grounding lug extending
from the adapter must be connected
to a permanent ground such as a
properly grounded outlet box. The
adapter should not be used if a
three-slot grounded receptacle is
available.
2. TURNING THE HEATER ON
Plug in unit to power outlet， the POWER LED will light. To turn the heater
ON, press the MODE button, the heater will wait in ECO Mode.
3. HEATING MODES
Press the MODE button to toggle between the different modes: ECO, HIGH,
LOW and STANDBY. Heater exit from any mode to standby mode by
pressing the STANDBY button.
.
4. ECO MODE – 1500W/1000W
ECO mode is a computerized mode to optimize energy efficiency. It will
programmatically select between HIGH and LOW power mode to heat up
the room to the desired temperature in the most effective way. Once the
desired temperature is achieved, the heater will maintain the room to the set
temperature. ECO mode is the environmental friendly operating mode.
5. HIGH POWER MODE – 1500W
HIGH mode will control the heater to operate at high power until the room
reached the set temperature. The heater will stop heating and initiate
component cooling process before turning off the fan. Once the desired
temperature is achieved, the heater will maintain the room to the set
temperature.
Loading ...
Loading ...
Loading ...