Loading ...
Loading ...
Loading ...
HOW TO SET UP YOUR TRACTOR
CONNECT BATTERY
,&CAUTION: Do not short battery termF
rials by allowing a wrench or any other
object to contact both terminals at the
same time. Before connecting battery, re-
move metal bracelets, wristwatch bands,
rings, etc. Positive terminal must be con-
nected first to prevent sparking from acci-
dental grounding.
o Remove cardboard packing from seat
pan and lift seat pan to raised position.
o Open battery box door and remove pro-
tective plastic.
= Remove terminal protective caps and
discard.
° If this battery is put intoservice after
month and year indicated on label (label
located between terminals) charge bat.
tery for minimum of one hour at 6-10
amps°
o First connect RED battery cable to posi-
tive (+) terminal with hex bolt, flat wash-
er, lock washer and hex nut as shown.
Tighten securely.
, Connect BLACK grounding cable to
negative (-) termina! with remaining hex
bolt, flat washer, lock washer and hex
nut. Tighten securely.
• Close battery box door. Open battery
box door for:
,, Inspection for secure connections
(to tighten hardware).
• Inspection for corrosion.
, Testing battery.
• Jumping (if required).
• Periodic charging.
Positive Discard "lermtnal
(Red) Cable Proctective Caps
Lock Washer
Flat Washer
Hex Bolt
INSTALL SEAT
Adjust seat before tightening adjustment
Imob.
= Remove cardboard packing on seat pan.
o Place seat on seat pan and assemble
shoulder bolt, Tighten shoulder bolt
securely,
• Assemble adjustment knob and flat
washer loosely, Do not tighten.
o Lower seat into operating position and
sit on seat,
, Slide seat until a comfortable position is
reached which allows you to press
clutch/brake pedal all the way down.
° Get off seat without moving its adjusted
position.
o Raise seat and tighten adjustment knob
securely.
Negative
(Black)
Seat
Seat Pan .,_===== _k
Shoulder _ frT---_'_l /[
Bolt ,k\_'C"_\_ _
F _ _("_- FlatWasher
Adjustment Knob
Seat
Batter
Door
9
Loading ...
Loading ...
Loading ...