Craftsman 917270411 tractor

User Manual - Page 30

For 917270411.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM
i
Poor cut - uneven
(cont'd)
Mower blades will
not rotate
Poorgrass dis-
charge
Headlight(s) not
working (if so
equipped)
i
Battery willnot
charge
Engine "backfires"
when turning
engine "OFF"
CAUSE CORRECTION
grass, leaves, and trash
around mandrels.
° Obstruction in clutch
mechanism.
o Worn/damaged mower
drive belt.
, Frozen idler pulley.
[ Frozen blade mandrel.
i
Engine speed too slow,
Travel speed too fast.
= Wet grass.
Mower deck not level.
Low/uneven tire air pres-
sure.
Worn, bent or loose blade.
Buildup of grass, leaves
and trash under mower.
Mower drive belt worn,
o Blades improperly
installed.
= Improper blades used.
Clogged mower deck vent
holes from buildup of
grass, leaves, and trash
around mandrels.
° Switch is "OFF".
= Bulb(s) burned out.
Faulty light switch.
= Loose or damaged wiring.
= Blown fuse,
Bad battery cell(s).
Poor cable connections.
Faulty regulator (if so
equipped).
o Faulty alternator.
° Engine throttle control not
set at "SLOW"
position for 30 seconds
before stopping engine.
i ,
o Remove obstruction.
° Replace mower drive belt.
Replace idler pulley.
Replace blade mandrel.
, i
" Place throttle control in
"FAST" position.
= Shift to slower speed.
* Allow grass to dry before
mowing.
, Level mower deck.
i,_ Check tires for proper air
pressure.
Replace/sharpen blade.
= Tighten blade bolt.
:'r Clean underside of mower
: housing.
Replace mower drive belt.
, Reinstall blades sharp edge
down.
o Replace with blades listed in
this manual.
o Clean around mandrels to
open vent holes.
Turn switch "ON".
Replace bulb(s).
° Check/replace light switch.
Check wiring and connections.
, Replace fuse.
° Replace battery.
° Check/clean all connection&
o Replace regulator.
Replace alternator.
. Move throttle control to
"SLOW" position and allow
to Idle for 30 seconds before
stopping engine.
3O
Loading ...
Loading ...
Loading ...