Loading ...
Loading ...
Loading ...
8
|
Wolf Customer Care 800.222.7820
FRYER MODULE OPERATION
Modes of Operation
LOCK MODE
In lock mode, all touch pad operations on the control panel
are disabled and the heating element is deenergized. A
steady glowing light within the key symbol indicates that the
module is locked. Refer to the illustration below.
• To lock the control panel, touch and hold the key symbol
for 3 seconds. Three chimes will sound and the light
within the key symbol will illuminate. The module is now
in lock mode.
• To unlock the control panel, touch and hold the key
symbol for 3 seconds. Two chimes will sound and the
light within the key symbol will go out. The module is
now in idle mode.
IMPORTANT NOTE: When the module is powered up for the
rst time or if there has been a power outage, the module
will default to lock mode.
IDLE MODE
After unlocking the control panel as described in lock mode,
the module enters the idle mode of operation. All touch pad
operations on the control panel are enabled.
Fryer Module Operation
INITIAL START-UP
Before using for the rst time, clean your fryer module thor-
oughly with hot water and a mild detergent. Rinse and dry
with a soft cloth. This removes any residual oil and grease
left on the surface from the manufacturing process. Refer to
care recommendations on page 13.
When the module is powered up for the rst time it will
default to lock mode. To unlock the control panel, touch and
hold the key symbol for 3 seconds.
IMPORTANT NOTE: A small amount of smoke and odor may
be noticed during the initial break-in period.
CAUTION
Oil must be added to the fryer basin before turning
the unit on. Burns or damage to the fryer module may
result when pouring oil into a heated fryer basin.
Control panel.
Temperature
LCD display
Power bar
indicator
Temperature
adjustment
Timer LED
display
Lock key
touch pad
OFF ON
touch pads
CLEAR
touch pad
Loading ...
Loading ...
Loading ...